Article 1: All kinds of cranes should be equipped with signs indicating mechanical properties, and winch limiters, load controllers, interlocking switches and other devices should be installed as needed. Track cranes should be equipped with travel limiters and rail clamps. They should be checked and tested before use.
Article 2: The wire rope must be arranged neatly on the drum, the tail must be firmly clamped, and at least three turns must be retained during work.
Article 3: The performance of the crane shall not be changed arbitrarily.
Article 4: During operation, the signal of the commander must be obeyed. When the signal is unclear or may cause an accident, the operation should be suspended.
Article 5: During lifting, no one should stay or walk under the lifting object.
Article 6: The lifting object should be pulled by the rope, the speed should be uniform and stable, and sudden braking and change of direction are prohibited. The lifting object should be more than 0.5 meters above the obstacle, and the fall should be low and gentle to prevent tipping.
Article 7: When lifting objects, it is prohibited to stand on the objects.
Article 8: Establish and improve the maintenance, regular inspection and safe operation system of cranes, and educate relevant personnel to implement them conscientiously.
Article 9: Bridge cranes should be driven by full-time drivers, and there should be special people responsible for hooking and commanding (operator's license is required). Driving and commanding without a license are strictly prohibited.
Article 10: The work site of the crane should have sufficient lighting equipment and unobstructed lifting channels. It is prohibited to lift objects over people's heads.
Article 11: The maximum lifting weight should be marked on the obvious part of the crane, and overloading is prohibited.
