Most lifting equipment starts a vertical or vertical and horizontal working stroke after picking up materials, unloads after reaching the destination, and then travels empty to the picking location to complete a working cycle, and then performs a second lifting or transportation. Generally speaking, when the lifting equipment is working, picking up materials, moving and unloading are carried out in sequence, and the work of each corresponding mechanism is intermittent. Lifting equipment is mainly used to carry finished items. After being equipped with a grab bucket, it can carry bulk materials such as coal, ore, and grain. After being equipped with a bucket, it can lift liquid materials such as molten steel. Some lifting machinery, such as elevators, can also be used to carry people. In some occasions, lifting equipment is still the main operating machinery. For example, cranes for loading and unloading materials at ports and stations are the main operating machinery.
The working principles of lifting equipment are very similar. The following is a brief introduction to the working principles of the elevators that we use most frequently in daily life:
The elevator is a kind of lifting equipment composed of a walking mechanism, a hydraulic mechanism, an electric control mechanism, and a supporting mechanism. The hydraulic oil is formed into a certain pressure by the vane pump, and enters the lower end of the hydraulic cylinder through the oil filter, explosion-proof electromagnetic reversing valve, throttle valve, hydraulic control check valve, and balance valve, so that the piston of the hydraulic cylinder moves upward and lifts the heavy object. The return oil at the upper end of the hydraulic cylinder returns to the oil tank through the explosion-proof electromagnetic reversing valve. Its rated pressure is adjusted by the overflow valve, and the pressure gauge reading is observed through the pressure gauge.
The piston of the hydraulic cylinder moves downward, and the hydraulic oil enters the upper end of the hydraulic cylinder through the explosion-proof electromagnetic reversing valve. The return oil at the lower end of the hydraulic cylinder returns to the oil tank through the balance valve, hydraulic control check valve, throttle valve, and explosion-proof electromagnetic reversing valve. In order to make the heavy object descend smoothly and the braking safe and reliable, a balance valve is set on the return oil line to balance the circuit and maintain the pressure so that the descending speed is not changed by the heavy object. The throttle valve adjusts the flow and controls the lifting speed. In order to make the braking safe and reliable and prevent accidents, a hydraulic control check valve, that is, a hydraulic lock, is added to ensure that it can be safely self-locked when the hydraulic pipeline bursts accidentally. An overload sound alarm is installed to distinguish overload or equipment failure.
The electrical control system controls the rotation of the motor and the reversing of the flameproof electromagnetic reversing valve through the explosion-proof buttons SB1-SB6 to keep the load lifted or lowered, and adjusts the time delay through the "LOGO" program




